How to restart a furnace after an Arizona power outage

Step 1 of 3: Equipment

Why won't my furnace turn back on after the power went out?

A monsoon storm or a grid problem knocks the power out, and when it comes back, the furnace doesn't. With most Arizona homes heating with electricity, that's the whole system down, not just one part of it. You're left checking the thermostat and listening for a sound that isn't coming, trying to figure out if this is something simple or something that needs a repair call.

The furnace needs to be reset, and sometimes manually turned back on

An outage cuts power to the furnace's control board, and the board doesn't always pick back up where it left off. Most systems need the breaker switched off and back on, or the furnace's own power switch flipped off for a few seconds and back on, to let the board restart clean. If the thermostat went dark during the outage, check that it's reading and set to heat before anything else. When the reset doesn't bring it back, the control board itself may have been damaged by the power surge that often comes when electricity returns, and that's not something to keep testing on your own.

A woman with long wavy brown hair in a grey ribbed sweater sits on a couch indoors, looking toward a window, with a potted palm-like plant and fireplace behind her.
A woman with long brown hair wearing a green V-neck top and beige cardigan sits on a light sofa, looking off to the side, with a dining table, lamp and framed picture in the background.
A woman with long dark hair in a cream knit sweater sits on a beige sofa indoors, looking toward a bright window with a houseplant and framed picture in the background.
A woman with long dark hair in a green knit sweater sits on a couch indoors, smiling and looking toward a window with a blurred room behind her.

Why hasn't the heat come back on by itself?

The power's back, the lights work, but the house is still cold. You check the thermostat and it's blank or stuck resetting. Nothing kicks on in the closet or the attic where the unit sits. Some thermostats lose their program in an outage and need the time and settings put back in before they'll call for heat at all. If the breaker for the furnace tripped during the outage, it needs to be reset by hand, the system won't find its own way back. Left alone overnight in Arizona's cold snaps, a house with no heat gets uncomfortable fast, especially for young kids or anyone elderly.

A gray high-efficiency furnace with two PVC vent pipes stands in an unfinished basement beside sheet-metal ductwork, a framed and plastic-covered wall, and a bare concrete wall with vertical pipes.

Furnace running normal

Once it catches, the furnace runs the way it always has. Air moves through the ducts, the flue pipes show no sign of trouble, and the thermostat holds the temperature you set. No burning smell, no short cycling, no lockout light blinking on the control board.

A gray furnace cabinet in a basement, connected to galvanized sheet-metal ductwork and white PVC pipes, against a concrete wall with exposed metal piping and insulation overhead.

Furnace still down

The thermostat screen is blank or stuck on a reset message. Nothing hums on in the closet or attic where the unit sits. You've flipped the breaker back and the furnace still won't fire, or it tries and shuts off again within a minute or two.

Try It Yourself or Call for Help

Try first

  • Check the breaker for the furnace or air handler, usually labeled in the panel, and reset it if it's tripped.
  • Set the thermostat a few degrees above room temperature and wait a couple of minutes for the unit to respond.
  • Replace the thermostat batteries if the screen is blank or stuck, since a dead battery looks like a bigger problem than it is.
  • Check any switch near the unit itself, often a light switch look-alike by the attic or closet access, and make sure it's on.
  • Listen for a hum or click from the attic or closet when you raise the thermostat, which tells you the unit is at least getting power.

Call a contractor

  • The breaker trips again right after you reset it, which points to a short or an overloaded circuit rather than a one-time surge.
  • The unit stays silent with power confirmed at the breaker and the switch, since something inside isn't getting past its own safety checks.
  • You hear a clicking or humming that doesn't turn into the furnace running, which usually means a part isn't completing its job.
  • The thermostat has power but the furnace still won't respond to it, which points to the connection between the two rather than either one alone.
  • A breaker trip during the outage lines up with a burning smell or warm spot on the panel, which isn't something to keep testing yourself.
A gray furnace cabinet in a basement with sheet-metal ductwork, white PVC vent pipes, and black gas piping against a concrete wall and wood-framed partition on a bare concrete floor.

Furnace working normally

The unit sits quiet most of the time, then starts on its own when the thermostat calls for heat. Air moves through the duct without any rattle, and the pipes beside it stay dry and sound. No smell, no banging, no lights blinking on the unit itself.

A gray metal furnace with two white PVC vent pipes stands on a concrete floor beside galvanized sheet-metal ductwork in a basement or utility space with wood framing.

Furnace in trouble

The furnace tries and stops, or doesn't try at all. Rust on the cabinet or around the flue pipes can mean a unit that's been struggling long before this outage. A storm can be the thing that finally pushes an older system past the point it can recover on its own.

A gray-haired woman in a cream knit sweater stands in a dimly lit kitchen at night, looking to her right, with a round loaf of bread in the foreground and a dark window and potted plant behind her.
A woman with her hair in a bun holds a sleeping young child against her chest, both wrapped in a textured beige knit blanket on a sofa in a dimly lit room with a lamp, framed picture, and bookshelf behind them.

A local pro for your furnace repair

Send the request today and let a furnace pro reach out to you.

You're not committing to anything by asking.

What a tripped breaker tells you

A breaker trips because it caught a surge, the kind a power outage often sends through a house when the grid comes back online unevenly. If the furnace breaker is the only one tripped, the surge is likely the whole story, and resetting it once should hold. If it trips again right after you reset it, something past the breaker is drawing too much current, and that's past the point of flipping a switch.

Why the thermostat loses its memory

Thermostats that run on house power, not batteries, lose their programming the moment power cuts out, the same way a clock radio blinks midnight after an outage. When power returns, some models come back to a default setting instead of the one you had before, and that default might not call for heat at all. Checking the setpoint, not just the display, is how you catch this. A thermostat that looks fine can still be holding a temperature well below what the house needs.

Winter nights average 39°F statewide

Nights here average 39°F in winter, cold enough that a furnace stuck off after an outage won't just make the house uncomfortable, it'll let it slide fast. That's worth knowing before you decide a breaker reset and a thermostat check can wait until morning.

NOAA nClimDiv 1991-2020 county normals weighted by homes

If you reset the breaker and the thermostat still shows nothing, the problem survived the outage. It was already failing, and the surge just finished it off.

If the breaker reset brings the display back and the furnace fires, the outage was the whole cause. Nothing else needs looking at tonight.

An older metal furnace with a louvered front panel stands against a concrete basement wall, connected to sheet-metal ductwork and a flue pipe, with copper and steel pipes running alongside.
Before you get your furnace repair
A beige high-efficiency furnace stands on a concrete basement floor beside sheet-metal ductwork, with white PVC vent pipes and a gas line running along an insulated wood-framed wall.
After you get your furnace repair

A furnace that won't restart after an outage is either waiting on a breaker reset or telling you something broke before the lights ever went out. The breaker and the thermostat check sort out which one you're dealing with. If those don't bring it back, the furnace needs someone who can look at the control board and the ignition system and say what the surge caught. You don't have to track that person down yourself. Send the request and a licensed contractor who works on furnaces in your area gets in touch, and from there it's their job to find the problem, not yours. With Arizona nights cold enough to matter once the sun's down, that's one less thing to sort out on your own while the house sits cold.

Sunlight falls across a beige upholstered sofa with a textured woven cushion and a chunky knit throw, beside a dark wood cabinet holding a ceramic vase with green leafy branches, near a white-framed window.
A sunlit corner of a room with a wooden side table holding a ceramic vase of green foliage and a wooden bowl, beside a light upholstered sofa with a knit throw and rust-colored pillow, with window shadows cast on a beige wall.
A sunlit room corner with beige walls, a white-framed window with sheer cream curtain, wood floor with a light rug, and a woven basket holding a knit blanket.
A beige ceramic vase holding a leafy green branch sits on a wooden cabinet in a corner, with sunlight through a sheer curtain casting leaf shadows on the wall.
A grey upholstered sofa with a rust-orange velvet cushion and a textured throw sits beside a window with linen curtains, next to a wooden side table holding a pale ceramic vase of olive branches.

Get the right pro for your furnace

Get the furnace repair search off your mind today.

Send it today

It costs nothing to send, and you don't have to hire anyone.